Page 2 of 2

Re: 71 R50/5 Center stand/Wheel removal

Posted: Thu Jun 16, 2016 3:12 pm
by Duane Ausherman
No, and I can't tipe or spel either. I meant "Don't lose the top hat spacer." On a 70 and 71 they are on the outside and often got lost when they fall out. Go to http://tinyurl.com/j8akspl to see one.

Also make sure that your swing arm isn't bent, as is common.

Re: 71 R50/5 Center stand/Wheel removal

Posted: Thu Jun 16, 2016 3:48 pm
by Kurt in S.A.
Duane has the "top hats" in this figure:

http://w6rec.com/duane/bmw/wheel_bearing/stack.jpg

Kurt in S.A.